Scandia Model 626 Folded Film Overwrapper
This machine was previously used to wrap CD / DVD Cases at 120 Pieces Per Minute. The machine was in working condition when removed from service and has been in storage for a couple of years. The 600 Series Scandia Machines are know for their durability, simple design, and speed. With very little electronics they are simple to repair, easy to troubleshoot, and can be easily retooled to fit your application.
Method of Operation: The package is presented to the machine and transferred to the Feed Chain. The package is carried through the vertically fed web of film and enters the Side Folding and Sealing Section. The film on the leading edge of the carton is tucked by the stationary Side Tuckers mounted to the package track then folded and heat sealed. After reaching the end of this section, the package is transferred 90 degrees to the Crossfeed Assembly, where the final folding and sealing of the envelope fold on the trailing side is completed. The package then exits the machine. Film is cut from the film roll, by a rotary knife cutting against a stationary knife, immediately after the carton has engaged the film are both are trapped between bottom and top plates for positive film positioning.
- Model: 626
- Serial Number: 1-6595
- MFG Date: 1995
- Voltage: 208Vac 3 Phase
- Min. Product Dimentions: 2″ Long x 3.25″ Wide x .3125″ Tall
- Max. Product Dimentions: 6.875″ Long x 8″ Wide x 2″ Tall
- Feed Orientation: Right Hand Operation
- Seal Jaw: 10″