Sealers – Valiant Industries https://valiantindustriesllc.com Mon, 28 Apr 2025 16:10:49 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://valiantindustriesllc.com/wp-content/uploads/cropped-favicon-150x150.jpg Sealers – Valiant Industries https://valiantindustriesllc.com 32 32 Lepel CS Plus Induction Heat Sealer https://valiantindustriesllc.com/lepel-cs-plus-induction-heat-sealer/ Wed, 04 Sep 2024 15:47:45 +0000 https://valiantindustriesllc.com/?post_type=product&p=13308 Fischbein Pils 300 Pinch Sealer https://valiantindustriesllc.com/fischbein-pils-300-pinch-sealer/ Thu, 26 Oct 2023 12:25:43 +0000 http://158.106.129.7/~valianttes/fischbein-pils-300-pinch-sealer/ Bosch B550 Band Sealers https://valiantindustriesllc.com/bosch-b550-band-sealers/ Thu, 26 Oct 2023 12:25:43 +0000 http://158.106.129.7/~valianttes/bosch-b550-band-sealers/ Preferred Packaging Sealer https://valiantindustriesllc.com/preferred-packaging-sealer/ Thu, 26 Oct 2023 12:05:24 +0000 http://158.106.129.7/~valianttes/preferred-packaging-sealer/ Holmatic CFS 750 Container Sealer https://valiantindustriesllc.com/holmatic-cfs-750-container-sealer/ Fri, 26 May 2023 14:39:23 +0000 https://valiantindustriesllc.com/?post_type=product&p=11067
  • 1. Automatic, high speed, continuous conduction sealing for containers with heat sealable film from roll stock by means of a continuous rotary die cutter and heat seal stations. 2. Standard machine configuration is left-to-right product flow as determined from the operator side of the machine. 3. Containers are fed into the machine from a continuous, tabletop chain conveyor. A dual timing screw assembly designed for the container feeds the containers into the machine at the desired spacing and speed. 4. A Butler two-position automatic film feeding and splicing system is provided to feed the lid stock material into the die cutting assembly. The film system is equipped with an accumulator to allow roll film changes while the machine continues to operate. An automatic splicing unit is provided for making overlap splices. 5. An automatic film guiding system is provided to guide the lid stock into the rotary die cutter. The guiding system controls the position of the web within .06 inches. 6. A continuous motion rotary die cutting assembly is provided to cut the lid stock to the appropriate size and shape. The assembly consists of an anvil and cutting die, which is servo-driven and matches the container speed to place the lid stock in the sealing position. 7. Once the lid stock has been cut to the appropriate size, it is positioned in place for sealing. The containers are precisely located under continuous motion heat seal assemblies by means of a cam actuated jaw assembly. The jaw positions the container as the heat seal assembly simultaneously seals the lid stock to the container. 8. Each heat seal station rotates continuously on a turret assembly and is specifically designed for the container. The head is air driven and has an independent temperature control for each assembly. The heat seal head down cycle is PLC controlled for precise heat seal dwell time independent of machine speed. 9. Following the sealing of the lid stock to the container, the heat seal head lifts, the locating jaws retract and the container is conveyed out of the machine. As the container is conveyed out of the machine, the scrap lid stock is vacuumed to a remote disposal point. 10. The vacuum scrap removal system includes a venturi-style blower with ductwork to divert scrap web to a Buyer-supplied bin located at the front of the machine. 11. Interlocked servo-drives on the infeed, the conveyor, the rotary die cutter, and the heat seal assembly allow a maximum heat seal time of 1.5 seconds. 12. Interlocked clutches are included to stop the machine in the event of a jam. 13. The machine is completely enclosed in a guarding system integrated with the base. The doors have full-length windows for clean observation of the machine function and the drive mechanisms. Tunnel guards are provided on the entrance and exit conveyors. All doors have electrical door locks to prevent opening until the machine is stopped. Lexan covers are provided on the top of the machine with an opening for the turret. 14. Central lubrication is provided. 15. Change parts are included to handle both containers, Ø5” diameter and two heights.
    •                ]]>
  • 1. Automatic, high speed, continuous conduction sealing for containers with heat sealable film from roll stock by means of a continuous rotary die cutter and heat seal stations. 2. Standard machine configuration is left-to-right product flow as determined from the operator side of the machine. 3. Containers are fed into the machine from a continuous, tabletop chain conveyor. A dual timing screw assembly designed for the container feeds the containers into the machine at the desired spacing and speed. 4. A Butler two-position automatic film feeding and splicing system is provided to feed the lid stock material into the die cutting assembly. The film system is equipped with an accumulator to allow roll film changes while the machine continues to operate. An automatic splicing unit is provided for making overlap splices. 5. An automatic film guiding system is provided to guide the lid stock into the rotary die cutter. The guiding system controls the position of the web within .06 inches. 6. A continuous motion rotary die cutting assembly is provided to cut the lid stock to the appropriate size and shape. The assembly consists of an anvil and cutting die, which is servo-driven and matches the container speed to place the lid stock in the sealing position. 7. Once the lid stock has been cut to the appropriate size, it is positioned in place for sealing. The containers are precisely located under continuous motion heat seal assemblies by means of a cam actuated jaw assembly. The jaw positions the container as the heat seal assembly simultaneously seals the lid stock to the container. 8. Each heat seal station rotates continuously on a turret assembly and is specifically designed for the container. The head is air driven and has an independent temperature control for each assembly. The heat seal head down cycle is PLC controlled for precise heat seal dwell time independent of machine speed. 9. Following the sealing of the lid stock to the container, the heat seal head lifts, the locating jaws retract and the container is conveyed out of the machine. As the container is conveyed out of the machine, the scrap lid stock is vacuumed to a remote disposal point. 10. The vacuum scrap removal system includes a venturi-style blower with ductwork to divert scrap web to a Buyer-supplied bin located at the front of the machine. 11. Interlocked servo-drives on the infeed, the conveyor, the rotary die cutter, and the heat seal assembly allow a maximum heat seal time of 1.5 seconds. 12. Interlocked clutches are included to stop the machine in the event of a jam. 13. The machine is completely enclosed in a guarding system integrated with the base. The doors have full-length windows for clean observation of the machine function and the drive mechanisms. Tunnel guards are provided on the entrance and exit conveyors. All doors have electrical door locks to prevent opening until the machine is stopped. Lexan covers are provided on the top of the machine with an opening for the turret. 14. Central lubrication is provided. 15. Change parts are included to handle both containers, Ø5” diameter and two heights.
    •                ]]>         Bosch CBS-D Continuous Band Sealer https://valiantindustriesllc.com/bosch-cbs-d-continuous-band-sealer/ Tue, 13 Dec 2022 12:22:25 +0000 https://valiantindustriesllc.com/?post_type=product&p=9412
  • Heating bar length: 15 inches
  • Output: up to 1,200 inches per minute
  • Toolless band changing
  • Single point heading and cooling bar adjustment
  • Thermally isolated heat and cool bars
  • Digital temperature controls
  • Product range: all heat-sealable materials
  • Sealing bands: fiber glass with Teflon coating
  • Sealing width: .25 inches (6 millimeters)
    • ]]>
  • Heating bar length: 15 inches
  • Output: up to 1,200 inches per minute
  • Toolless band changing
  • Single point heading and cooling bar adjustment
  • Thermally isolated heat and cool bars
  • Digital temperature controls
  • Product range: all heat-sealable materials
  • Sealing bands: fiber glass with Teflon coating
  • Sealing width: .25 inches (6 millimeters)
    • ]]>         2012 ADCO CARTON SEALER https://valiantindustriesllc.com/2012-adco-carton-sealer/ Tue, 05 Oct 2021 13:38:12 +0000 https://valiantindustriesllc.com/?post_type=product&p=8090 ADCO 15HCS-50-WD, S/N 5299HG

    • Floor plan and elevation drawing attached
    • Originally shipped from ADCO in October 2012
    • Hand operated carton sealer
    • 36” wide x 108” long stainless steel frame
    • Washdown construction with Nema 4X electricals
    • 15” carton flight lug centers
    • 208v/3ph/60hz electrics
    • Nordson hot melt glue system with two (2) guns and hoses
    • Relay logic with push button controls
    • Group lubrication
    Published machine speed range:
    • Up to 50 cartons per minute
    Published carton size range:
    •  Length – 2” to 12”
    • Width – 3/4” to 4-1/2”
    • Depth – 3-1/2” to 12”
    ]]>     ADCO 15HCS-50-WD, S/N 5299HG

    • Floor plan and elevation drawing attached
    • Originally shipped from ADCO in October 2012
    • Hand operated carton sealer
    • 36” wide x 108” long stainless steel frame
    • Washdown construction with Nema 4X electricals
    • 15” carton flight lug centers
    • 208v/3ph/60hz electrics
    • Nordson hot melt glue system with two (2) guns and hoses
    • Relay logic with push button controls
    • Group lubrication
    Published machine speed range:
    • Up to 50 cartons per minute
    Published carton size range:
    •  Length – 2” to 12”
    • Width – 3/4” to 4-1/2”
    • Depth – 3-1/2” to 12”
    ]]>         Belcor 252/505 Sealer and Erector Combo https://valiantindustriesllc.com/belcor-252-505-sealer-and-erector-combo/ Tue, 28 Jul 2020 18:21:49 +0000 https://valiantindustriesllc.com/equipment/import-placeholder-for-6229/ Belcor 150/505 Sealer and Erector Combo https://valiantindustriesllc.com/belcor-150-505-sealer-and-erector-combo/ Tue, 28 Jul 2020 18:21:49 +0000 https://valiantindustriesllc.com/equipment/import-placeholder-for-6232/ FISCHBEIN Pinch Inner Liner Sealer https://valiantindustriesllc.com/fischbein-pinch-inner-liner-sealer/ Tue, 28 Jul 2020 18:16:24 +0000 https://valiantindustriesllc.com/equipment/import-placeholder-for-5023/ FISCHBEIN MODEL PILS200 Pinch inner liner sealer

    With  14 FT V TROUGH

    Serial Number: L001083100 View Brochure]]>     FISCHBEIN MODEL PILS200 Pinch inner liner sealer

    With  14 FT V TROUGH

    Serial Number: L001083100 View Brochure]]>         3M Matic Top and Bottom Sealer https://valiantindustriesllc.com/3m-matic-top-and-bottom-sealer/ Tue, 28 Jul 2020 18:14:07 +0000 https://valiantindustriesllc.com/equipment/import-placeholder-for-4312/